ZAMP- Z-Tech Series 1A SFI 38.1 HANS Style Device Racing Head and Neck Restraint

  

The Zamp Z-Tech Series 1A head restraint is a brand new, patent pending helmet restraint designed to maximize adjustability without sacrificing your safety. The advanced axis adjustment of the Z-tech Series 1A allows you to adjust the width, arm angle and arm width quickly and easily to provide maximum comfort in any race vehicle. The main body of the head restraint is constructed from glass reinforced nylon for a lightweight and strong system that won't fail under stress. All hardware is constructed from stainless steel to last season after season.

The helmet tethers are constructed from Kevlar webbing. The new series 1A has new features never seen before in the Head and Neck Restraint. Most Items Delivered in 3 Days or Less.

See below for full details. The new series 1A has new features never seen before in the Head and Neck Restraint market. Advanced Axis Adjustment allows you to adjust width, Arm angle, and Arm width.

Fits different body shapes and sizes and adjusts to different race vehicles. Glass Reinforced Nylon a lightweight and very specialized material which offers leading structural characteristics. Stainless Steel Hardware screws and binary post built with high quality and strength to give long lasting strength.

Kevlar Webbing Tether connects helmet to restraint. Spring Clip Quick Connect allows easy connect/removal from helmet with one hand. Belt Channel with Wings accepts 2 or 3 Belts. Replaceable Padding washable/replaceable padding gives ease to clean and/or replace for continued comfort. Helmet Hardware all hardware needed for ONE HELMET included. Series 1A Helmet Kit Complet. Step 1 Adjust the shoulder width adjustment. You will want to measure the width of your neck diag.

The Series 1A has a neck width that ranges from 4.75 to 7.75 inches. Upon establishing that measurement, you will want to adjust your shoulder adjustment diag. 1-B to 1 inch wider than your neck measurement.

Remove 4 screws and binary posts and set to correct position. If you will be adjusting wider than the setting out of the box, you may need to loosen the strap, video instructions.

Step 2- Adjust the UPPER ARM Angle. It is recommended that you adjust this in your race seat to get the best angle for your individual needs. There are two screws on each sidediag. Screw #1 is the only screw that needs to be removed to adjust angle. Screw #2 does not need to be removed and it has thread lock on it from mfg. Remove Screw #1, and adjust the arm angle so that fits snug against body, but does not protrude into your body. Adjust both sides to same angle.

Step 3- Adjust the LOWER ARM Length. It is recommended that you adjust this in your race seat to get the best length for your individual needs. There are two screws on each side diag. Adjust to a length that comfortably fits on your chest and in a position that allows the buckle from seat belts to tighten securely.

The lower arm can be mounted inside or outside the upper arm. Upon completion of steps 1-3 , once you are 100% happy with the fit of your restraint, we recommend that at this time your remove all screws one at a time (except screw #2 in step 2) and secure them with tread lock blue and tighten snug. Step 4- Adjust tethers and strapping.

It is recommended that you evaluate the video here. In regards to adjustment of tethers and strapping. You will want to make sure the strapping stays in the same configuration throughout the hardware as you receive it from the mfg. There are two points which you will want to adjust diag.

Point #1 should be adjusted to 2.75 inches (70mm) and Point #2 should be adjusted to approx. Step 5- Setting Up Helmet. Installation of Z-Tech hardware will depend on if your helmet has a certified M6 Insert or a Predrilled. Helmet inserts that are not certified are not recommended.

M6 Inserts Set Part #2 against helmet shell centered to the insert. Then put the M6 Screw provided through Part #1 with thread lock blue on the end of the screw.

Align Part #1 and M6 Screw through Part #2 and carefully screw the M6 insert into the helmet without cross threading during installation. Tighten snuggly and allow thread lock to dry. Predrilled You will first need to install Z-Tech nut washer Part #3 on the interior of the shell.

Slide Part #3 between the Shell and EPS/Dense foam upper liner, carefully positioning it center to the predrilled hole. Once Part #3 is positioned correctly, then you can move on. Set Part #2 against helmet shell centered to the insert.

Want to see other Zamp products we sell? Looking for Zamp Suites, Helmets, Helmet Shields or other Zamp items?

As with any electronic item, additional installation parts may be required to complete installation. Please message us for details. All Sales final on Racing product once the item has been opened or wrapper removed. We want you to get your item FAST.

For most orders placed Monday through Friday before 1pm EST we are able to get your order out the door that day. Your satisfaction is our top priority and we'll strive to make sure every customer is 100% satisfied. We are committed to providing you a quality product at the lowest prices possible. We also realize that the quality of the customer service we provide you plays hand and hand with the product you receive. We have been in the Consumer Electronics business for over 15 years and know what it takes to please our customers.

We strongly encourage professional installation of any electronic devices. We are not responsible for any damage caused by improper installation. We are not responsible for any damage caused by defective products or loss of use, uninstall/reinstall charges that may be incurred due to defective products. By purchasing your product from us you agree to these terms and conditions with NO exceptions. Any defective item may be exchanged for the exact same item. Items without a return authorization number clearly marked on the outside of the package will be refused. We hope you feel comfortable with our policies, as we have done extensive market research and have continuously upgraded our policies to make our customers shopping experience the best it can possibly be. We do not allow local pick-ups or drop-offs. No third party billing offered. The item "ZAMP- Z-Tech Series 1A SFI 38.1 HANS Style Device Racing Head and Neck Restraint" is in sale since Saturday, December 9, 2017. This item is in the category "eBay Motors\Parts & Accessories\Performance & Racing Parts\Safety Equipment\Head & Neck Restraints". The seller is "race_choice" and is located in United States. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Viet nam.

• Brand: Zamp
• Manufacturer Part Number: NT001003
• Warranty: 1 year
• Custom Bundle: No
• Model: NT001003
• Size: VARIES
• Item Warranty: 1 year