UNF 1/2 Socket Cap Screw High Tensile 12.9 Self Colour DIN912

  
UNF 1/2 Socket Cap Screw High Tensile 12.9 Self Colour DIN912. , Fine Pitch, High Tensile (12.9), Self Colour DIN 912. Allen (hex) Socket, Cap Head, Allen Screw/ Bolt, ISO 4762, BS 2470, Series 1960 Fixaball sells all lengths of 1/2 UNF, Allen (hex) Socket, Cap Head, Allen Screw/ Bolt. What is a socket cap screw/ bolt? The,'Socket Cap Screw/ Allen Bolt,' term is used to describe a fastener that is either fully or partially threaded. A screw is fully threaded and a bolt is partialy threaded. Some engineers may call them screws if the person uses the shorter length range of sizes. The thread stays the same length as the fastener gets longer and the maximum length of thread is equal to 2.5 times the diameter (or thereabouts).

Socket,' refers to the hexagon shaped indentation found on the top of the fasteners' head. Here, you can use a hexagon key (Allen Key) to tighten and loosen the fastener.

Cap' refers to the cylindrical shaped head. Orders placed before 2pm are dispatched same day (Mon-Fri).

Of Items in Pack','Length' and'Quantity' of packs, selection from the drop down menus. Available Materials: Black/ Self Colour Material/ Finish Appearance Level of Corrosion Resistance Typical Application High Tensile Steel Self-Colour (black) Low, without further surface treatment - No exposure to moisture - Often Greased/ Oilied FIXABALL Allen/ Hex Socket Sizes to fit, Allen/ Hex Cap Head, Screw/ Bolts Diameter Size Series 1960 (MOST COMMON) Series 1936 USUALLY ASSOCIATED WITH B. S, BSW, BSF THREADS 1/2" 3/8" 3/8 Fixaball - Specialist Fixings and Fasteners UNC/ UNF Socket Cap Screws Dimensions Conforming to ASME/ ANSI B18.3 1960 Series All measurements in Inches Pitch TPI Head Diameter Shank Diameter Head Height Hex Key Size Diameter UNC UNF Max Max Max Nom ½ 13 20 0.75 0.50 0.50 3/8 UNIFIED THREAD STANDARDS The basic American standards for fastening screw threads as agreed upon by standard bodies of Canada, the United Kingdom, and the United States. They are a complete and integrated system of threads for fastening purposes. Their outstanding characteristic is general interchangeability of threads achieved through the standardization of thread form, diameter-pitch combinations, and limits of size Unified National (UN) thread form with a rounded root contour, applies only to external threads.

The UN thread form has a flat, or optionally, a rounded root contour. The majority of fasteners with a Unified thread form (UNC UNF) have a rounded root contour i. Unified National Fine (UNF) is a thread form with a 60 degree flank angle rounded roots and flat crests. For a given diameter it has a smaller thread pitch than an equivalent diameter UNC thread. Image is for illustrative purposes only. Allen (hex) Socket, Cap Head, Allen Screw/ Bolt, ISO 4762, BS 2470, Series 1960. Fixaball sells all lengths of 1/2 UNF, Allen (hex) Socket, Cap Head, Allen Screw/ Bolt. The,'Socket Cap Screw/ Allen Bolt,' term is uséd to describe a fastener. That is either fully or partially threaded.

Orders placed before 2pm are dispatched. Of Items in Pack','Length. Of packs, selection from the drop down menus. Allen Socket, Cap Head Screw/ Bolt lengths at Fixaball. High Tensile - 12.9 Grade.

Low, without further surface treatment. Allen/ Hex Socket Sizes to fit, Allen/ Hex Cap Head, Screw/ Bolts. Fixaball - Specialist Fixings and Fasteners.

UNF Socket Cap Screws Dimensions. Conforming to ASME/ ANSI B18.3 1960 Series.

The basic American standards for fastening screw threads as agreed upon by standard bodies of Canada, the United Kingdom, and the United States. Their outstanding characteristic is general interchangeability of threads achieved through the standardization of thread form, diameter-pitch combinations, and limits of size.

Unified National (UN) thread form with a rounded root contour, applies only to external threads. Sorry, our items are NOT available for pick-up. No additional information at this time. 3mm Dowel Pins A1 Stainless Steel DIN 7. 5mm Dowel Pins A1 Stainless Steel DIN 7.

6mm Dowel Pins A1 Stainless Steel DIN 7. UNF 1st Tapered Quality Machine Hand Taps HSS.

To be eligible for a return, your item must be unuséd and in the same condition that you received it. It must also be in the original packaging with original documentation. This will enable an easier process of locating and amending orders.

If you're not happy, we will do everything possible to help. Please, please, please keep all documents, stickers, labels and packaging; it makes the process run quicker and easier. Exchanges (if applicable) NO QUIBBLE - All exchanges are welcomed, assuming that items are suitable for re-sale. After 2pm your order will join the following days post.

Usually, the easy bit is getting the order out the door, but, what happens after can occasionally disappoint us both. 2% (10 orders) are late 1.4% (7 orders) 1 day late 0.4% (2 orders) 2 days late 0.2% (1 order) 3+ days late 0.01% is reported lost. If you need a definite arrival time please select an express service at check out to avoid disappointment.