- Head Brand New
- Brand
- A2z Fast (268)
- Air Flow Research (25)
- Arp (27)
- Bayam (31)
- Bga (21)
- Gwr Fasteners (36)
- Head (29)
- Hot Toys (35)
- Kayfast (43)
- Mars Performance (66)
- Procomp Electronics (25)
- Spalding Fasteners (28)
- Speed Daddy (60)
- Superbautoparts (30)
- The Gasket Shop (25)
- Timco (20)
- Triton (20)
- Tyc (61)
- U`king (35)
- Venom Inc. (23)
- ... (3371)
- Drive Style
- Head Style
- Allen Cap Head (12)
- Bugle (5)
- Button Head (22)
- Cap Head (60)
- Countersunk Head (21)
- Cylindrical Cap (29)
- Cylindrical Head (28)
- Domed (17)
- Flange Head (3)
- Flat (11)
- Flat Head (14)
- Hex (9)
- Hex Head (29)
- Hexagon (100)
- Hexagon Head (44)
- Pan Head (4)
- Round (7)
- Round Head (10)
- Socket Cap Head (13)
- Square (4)
- ... (3837)
- Material
- Power Source
- Suitable For
UNC 7/16 Socket Cap Screw High Tensile 12.9 Self Colour DIN912
UNC 7/16 Socket Cap Screw High Tensile 12.9 Self Colour DIN912. , Coarse Pitch, High Tensile (Grade'S'/ 12.9), Self Colour DIN 912. Allen (hex) Socket, Cap Head, Allen Bolt, ISO 4762, BS 2470 Fixaball sells lengths of 7/16, UNC, socket cap screw bolts. What is a socket cap screw/ bolt? The,'Socket Cap Screw/ Allen Bolt,' term is used to describe a fastener that is either fully or partially threaded. A screw is fully threaded and a bolt is partialy threaded. Some engineers may call them screws if the person uses the shorter length range of sizes. The thread stays the same length as the fastener gets longer and the maximum length of thread is equal to 2.5 times the diameter (or thereabouts). Socket,' refers to the hexagon shaped indentation found on the top of the fasteners' head. Here, you can use a hexagon key (Allen Key) to tighten and loosen the fastener.
Cap' refers to the cylindrical shaped head. Orders placed before 2pm are dispatched same day (Mon-Fri). Of Items in Pack','Length' and'Quantity' of packs, selection from the drop down menus. UNC, 7/16" Allen Socket, Cap Head Screw/ Bolt lengths at Fixaball: (Fully Threaded - FT, Partially Threaded - PT) 7/16"-14x1/2", (FT) SOCKET HEAD CAP SCREWS UNC SELF COLOUR 7/16"-14x5/8", (FT) SOCKET HEAD CAP SCREWS UNC SELF COLOUR (1960) 7/16"-14x7/8", (FT) SOCKET HEAD CAP SCREWS UNC SELF COLOUR (1960) 7/16"-14x1", (FT) SOCKET HEAD CAP SCREWS UNC SELF COLOUR (1960) 7/16"-14x1 1/4", (FT) SOCKET HEAD CAP SCREWS UNC SELF COLOUR (1960) 7/16"-14x1 1/2", (FT) SOCKET HEAD CAP SCREWS UNC SELF COLOUR (1960) 7/16"-14x1 3/4", (FT) SOCKET HEAD CAP SCREWS UNC SELF COLOUR (1960) 7/16"-14x2", (PT) SOCKET HEAD CAP SCREWS UNC SELF COLOUR (1960) 7/16"-14x2 1/4", (PT) SOCKET HEAD CAP SCREWS UNC SELF COLOUR (1960) 7/16"-14x2 1/2", (PT) SOCKET HEAD CAP SCREWS UNC SELF COLOUR (1960) 7/16"-14x2 3/4", (PT) SOCKET HEAD CAP SCREWS UNC SELF COLOUR (1960) 7/16"-14x3", (PT) SOCKET HEAD CAP SCREWS UNC SELF COLOUR (1960) 7/16"-14x3 1/4", (PT) SOCKET HEAD CAP SCREWS UNC SELF COLOUR (1960) 7/16"-14x3 1/2", (PT) SOCKET HEAD CAP SCREWS UNC SELF COLOUR (1960) 7/16"-14x3.3/4", (PT) SOCKET HEAD CAP SCREWS UNC SELF COLOUR (1960) 7/16"-14x4", (PT) SOCKET HEAD CAP SCREWS UNC SELF COLOUR (1960) 7/16"-14x4 1/2", (PT) SOCKET HEAD CAP SCREWS UNC SELF COLOUR (1960) 7/16"-14x5", (PT) SOCKET HEAD CAP SCREWS UNC SELF COLOUR (1960) 7/16"-14x5 1/2, (PT) SOCKET HEAD CAP SCREWS UNC SELF COLOUR (1960) High Tensile - 12.9 Grade.
Available Materials: Plain/ Black/ Self Colour Material/ Finish Appearance Level of Corrosion Resistance Typical Application High Tensile Steel Self-Colour (black with no surface treatment) Low, without further surface treatment - No exposure to moisture - Often Greased/ Oilied UNC - UNF Capscrew Dimensions Fixaball - Specialist Fixings and Fasteners UNC/ UNF Hexagon Socket Cap Screws Conforming to ASME/ ANSI B18.3 1960 Series Pitch TPI a ds h j Diameter UNC UNF Max Max Max Nom No. 4 40 48 0.18 0.11 0.11 5/16 No. 5 40 44 0.21 0.13 0.13 3/32 No. 6 32 40 0.23 0.14 0.14 3/32 No. 8 32 36 0.27 0.16 0.16 1/8 No.
10 24 32 0.31 0.19 0.19 5/32 ¼ 20 28 0.38 0.25 0.25 3/16 5/16 18 24 0.44 0.31 0.31 7/32 3/8 16 24 0.56 0.38 0.38 5/16 7/16 14 20 0.63 0.44 0.44 5/16 ½ 13 20 0.75 0.50 0.50 3/8 5/8 11 18 0.88 0.63 0.63 ½ ¾ 10 16 1.00 0.75 0.75 9/16 7/8 9 14 1.13 0.88 0.88 9/16 1 8 12 1.31 1.00 1.00 5/8 1.1/4 7 12 1.75 1.25 1.25 ¾ 1.1/2 6 12 2.00 1.50 1.50 1 UNIFIED THREAD STANDARDS The basic American standards for fastening screw threads as agreed upon by standard bodies of Canada, the United Kingdom, and the United States. They are a complete and integrated system of threads for fastening purposes. Their outstanding characteristic is general interchangeability of threads achieved through the standardization of thread form, diameter-pitch combinations, and limits of size Unified National Coarse (UNC) is a thread form with a 60 degree flank angle rounded roots and flat crests. For a given diameter it has a larger thread pitch than an equivalent diameter UNF thread. The unified thread is based on inch sizes and was first standardised in 1948 unifying the Whitworth and American standard thread forms.
Unified National Fine (UNF) is a thread form with a 60 degree flank angle rounded roots and flat crests. For a given diameter it has a smaller thread pitch than an equivalent diameter UNC thread. Unified National Extra Fine (UNEF) is a Unified thread form with a very fine (small) pitch that are typically used on instruments and parts requiring a fine adjustment. Unified National (UN) thread form with a rounded root contour, applies only to external threads.
The UN thread form has a flat, or optionally, a rounded root contour. The majority of fasteners with a Unified thread form (UNC UNF) have a rounded root contour i. Image is for illustrative purposes only.
, Coarse Pitch, High Tensile (Grade'S'/ 12.9), Self Colour DIN. Allen (hex) Socket, Cap Head, Allen Bolt, ISO 4762, BS 2470. Fixaball sells lengths of 7/16, UNC, socket cap screw bolts. The,'Socket Cap Screw/ Allen Bolt,' term is uséd to describe a fastener.That is either fully or partially threaded. Orders placed before 2pm are dispatched. Of Items in Pack','Length. Of packs, selection from the drop down menus. UNC, 7/16 Allen Socket, Cap Head Screw/ Bolt lengths at Fixaball.
(Fully Threaded - FT, Partially Threaded - PT). 7/16"-14x1/2", (FT) SOCKET HEAD CAP SCREWS UNC SELF COLOUR. 7/16"-14x5/8", (FT) SOCKET HEAD CAP SCREWS UNC SELF COLOUR (1960). 7/16"-14x7/8", (FT) SOCKET HEAD CAP SCREWS UNC SELF COLOUR (1960). 7/16"-14x1", (FT) SOCKET HEAD CAP SCREWS UNC SELF COLOUR (1960).7/16"-14x1 1/4", (FT) SOCKET HEAD CAP SCREWS UNC SELF COLOUR (1960). 7/16"-14x1 1/2", (FT) SOCKET HEAD CAP SCREWS UNC SELF COLOUR (1960). 7/16"-14x1 3/4", (FT) SOCKET HEAD CAP SCREWS UNC SELF COLOUR (1960). 7/16"-14x2", (PT) SOCKET HEAD CAP SCREWS UNC SELF COLOUR (1960).
7/16"-14x2 1/4", (PT) SOCKET HEAD CAP SCREWS UNC SELF COLOUR (1960). 7/16"-14x2 1/2", (PT) SOCKET HEAD CAP SCREWS UNC SELF COLOUR (1960). 7/16"-14x2 3/4", (PT) SOCKET HEAD CAP SCREWS UNC SELF COLOUR (1960). 7/16"-14x3", (PT) SOCKET HEAD CAP SCREWS UNC SELF COLOUR (1960). 7/16"-14x3 1/4", (PT) SOCKET HEAD CAP SCREWS UNC SELF COLOUR (1960).7/16"-14x3 1/2", (PT) SOCKET HEAD CAP SCREWS UNC SELF COLOUR (1960). 7/16"-14x3.3/4", (PT) SOCKET HEAD CAP SCREWS UNC SELF COLOUR (1960).
7/16"-14x4", (PT) SOCKET HEAD CAP SCREWS UNC SELF COLOUR (1960). 7/16"-14x4 1/2", (PT) SOCKET HEAD CAP SCREWS UNC SELF COLOUR (1960). 7/16"-14x5", (PT) SOCKET HEAD CAP SCREWS UNC SELF COLOUR (1960). 7/16"-14x5 1/2", (PT) SOCKET HEAD CAP SCREWS UNC SELF COLOUR (1960). High Tensile - 12.9 Grade. Available Materials: Plain/ Black/ Self Colour. Self-Colour (black with no surface treatment). Low, without further surface treatment. UNC - UNF Capscrew Dimensions. Fixaball - Specialist Fixings and Fasteners.UNC/ UNF Hexagon Socket Cap Screws. Conforming to ASME/ ANSI B18.3 1960 Series.
The basic American standards for fastening screw threads as agreed upon by standard bodies of Canada, the United Kingdom, and the United States. Their outstanding characteristic is general interchangeability of threads achieved through the standardization of thread form, diameter-pitch combinations, and limits of size. Unified National Coarse (UNC) is a thread form with a 60 degree flank angle rounded roots and flat crests. Unified National Extra Fine (UNEF) is a Unified thread form with a very fine (small) pitch that are typically uséd on instruments and parts requiring a fine adjustment. Sorry, our items are NOT available for pick-up. No additional information at this time. M10 Socket Screw Button Round A2 304 Stainless Steel DIN 9427. M10 Socket Cap Allen Screw Bolt A2/304 Stainless Steel DIN 912.BSW Whitworth 3/16 Socket Cap Screw High Tensile 12.9 DIN 912. UNF 5/8 Socket Cap Screw High Tensile 12.9 Self Colour DIN912.
You do not need a reason to request a return. Our policy lasts 30 days.
To be eligible for a return, your item must be unuséd and in the same condition that you received it. It must also be in the original packaging and saleable.