UNC 1/4 Socket Cap Screw A2 304 Stainless Steel DIN912

  
UNC 1/4 Socket Cap Screw A2 304 Stainless Steel DIN912. , Coarse Pitch, A2/ 304 Stainless Steel, Allen/ Hexagon Socket, Cap Head, Allen Bolt, DIN 912, ISO 4762, BS 2470 Fixaball sells lengths of 1/4, UNC, socket cap screws/ bolts. What is a socket cap screw/ bolt?

The,'Socket Cap Screw/ Allen Bolt,' term is used to describe a fastener that is either fully or partially threaded. A screw is fully threaded and a bolt is partialy threaded. Some engineers may call them screws if the person uses the shorter length range of sizes. The thread stays the same length as the fastener gets longer and the maximum length of thread is equal to 2.5 times the diameter (or thereabouts). Socket,' refers to the hexagon shaped indentation found on the top of the fasteners' head.

Here, you can use a hexagon key (Allen Key) to tighten and loosen the fastener. Cap' refers to the cylindrical shaped head. Orders placed before 2pm are dispatched same day (Mon-Fri). Of Items in Pack','Length' and'Quantity' of packs, selection from the drop down menus. UNC, 1/4" A2/ 304 Stainless Steel, Allen Socket, Cap Head Screw/ Bolt lengths available: (FT - Fully Threaded, PT - Partially Threaded) Size Description 1/4"-20x1/4", (FT) 1/4"-20x1/2", (FT) 1/4"-20x5/8", (FT) 1/4"-20x3/4", (FT) 1/4"-20x7/8", (FT) 1/4"-20x1", (FT) 1/4"-20x1 3/4", (PT) 1/4"-20x2", (PT) 1/4"-20x2 1/4", (PT) 1/4"-20x2 1/2", (PT) 1/4"-20x3", (PT) 1/4"-20x3 1/2", (PT) 1/4"-20x4", (PT) 1/4"-20x6, (PT) Material: A2/ 304 Stainless Steel Material/ Finish Appearance Level of Corrosion Resistance Typical Application Self Colour A2/ 304 Stainless Steel Dull Shine, Grey High - External Weathering not prone to chemical exposure e. Salt water UNIFIED THREAD STANDARDS The basic American standards for fastening screw threads as agreed upon by standard bodies of Canada, the United Kingdom, and the United States.

They are a complete and integrated system of threads for fastening purposes. Their outstanding characteristic is general interchangeability of threads achieved through the standardization of thread form, diameter-pitch combinations, and limits of size Unified National Coarse (UNC) is a thread form with a 60 degree flank angle rounded roots and flat crests. For a given diameter it has a larger thread pitch than an equivalent diameter UNF thread.

The unified thread is based on inch sizes and was first standardised in 1948 unifying the Whitworth and American standard thread forms. Unified National Fine (UNF) is a thread form with a 60 degree flank angle rounded roots and flat crests.

For a given diameter it has a smaller thread pitch than an equivalent diameter UNC thread. Unified National Extra Fine (UNEF) is a Unified thread form with a very fine (small) pitch that are typically used on instruments and parts requiring a fine adjustment. Unified National (UN) thread form with a rounded root contour, applies only to external threads. The UN thread form has a flat, or optionally, a rounded root contour. The majority of fasteners with a Unified thread form (UNC UNF) have a rounded root contour i.

Image is for illustrative purposes only. , Coarse Pitch, A2/ 304 Stainless Steel, Allen/ Hexagon Socket, Cap Head, Allen Bolt, DIN 912, ISO 4762, BS 2470. Fixaball sells lengths of 1/4, UNC.

The,'Socket Cap Screw/ Allen Bolt,' term is uséd to describe a fastener. That is either fully or partially threaded. Orders placed before 2pm are dispatched.

Of Items in Pack','Length. Of packs, selection from the drop down menus. UNC, 1/4 A2/ 304 Stainless Steel, Allen Socket, Cap Head Screw/ Bolt lengths available. (FT - Fully Threaded, PT - Partially Threaded). Material : A2/ 304 Stainless Steel.

Self Colour A2/ 304 Stainless Steel. External Weathering not prone to chemical exposure e.

The basic American standards for fastening screw threads as agreed upon by standard bodies of Canada, the United Kingdom, and the United States. Their outstanding characteristic is general interchangeability of threads achieved through the standardization of thread form, diameter-pitch combinations, and limits of size. Unified National Coarse (UNC) is a thread form with a 60 degree flank angle rounded roots and flat crests. Unified National Extra Fine (UNEF) is a Unified thread form with a very fine (small) pitch that are typically uséd on instruments and parts requiring a fine adjustment. Sorry, our items are NOT available for pick-up.

No additional information at this time. 0BA x 1.1/2 Socket Cap Screw High Tensile 12.9 DIN 912. M4 Machine Screws Slotted Countersunk Brass DIN 963. UNF 1st Tapered Quality Machine Hand Taps HSS. M4 - M20 Hex Nut Serrated Flange Zinc BZP DIN 6923. You do not need a reason to request a return.

Our policy lasts 30 days. To be eligible for a return, your item must be unuséd and in the same condition that you received it. It must also be in the original packaging and saleable.