Thunder Bolts Hex Head Steel Self Tapping Multi Fix Concrete Anchor Screw Fixing

  

They are the original and the best self tapping all purpose anchor. Thunderbolt is the original self-tapping. Anchor fixing with the power to be used with a range of Building.

The Thunderbolt® anchor and self tapping. Allows for safe anchorage, where the substrate becomes. The nut for the bolt. The Thunderbolt can be installed closer.

To edges and closer together at varying. Depths, which provides a stress free fixing.

It is the ideal general purpose anchor which can even be used on temporary jobs as it's completely removable unlike traditional anchor fixings which can be hard to remove. Thunderbolts use standard sized drill bits. Cost effective to fix any job. Thunderbolts are used by g.

Eneral builders, property developers, fencing contractors, shop fitters, plumbers and roofers for a variety of jobs including, supporting fence posts, attaching handrails to walls, affixing satellite dishes and joining timber battens to brick work. Drill a hole the same size as the Thunderbolt into the material.

(Ensure the hole is a little deeper than the bolt to allow for dust). Remove any loose dust from the hole. Screw in the Thunderbolt with a socket wrench. Apply a slight downward pressure to start the self-tapping action, as you would with a wood screw. Tighten the Thunderbolt to secure the fixture in place.

This item is in the category "Home, Furniture & DIY\DIY Materials\Nails, Screws & Fasteners\Screws & Bolts". The seller is "nutsnboltsuk2015" and is located in this country: GB. This item can be shipped worldwide.

• Bolt Size: M12 / 12 mm x 200 mm
• Pack Quantity: 48 Bolts
• Uses: Handrail Post Support Timber Batten Satellite Dis
• MPN: Thunder Bolt
• Bundle Listing: No
• Item Length: 0
• Thunderbolt Thunder Bolt Thunderbolts:: All Thread threaded Full Length Screw
• M8 Thunder Bolt Drill Diameter: 8mm
• Screw Size: M6 M8 M10 M12 M16
• M10 Thunder Bolt Drill Diameter: 10mm
• Drive Style: Spanner or Socket
• Self Tapping Tapped Tapper Temporary: Substrate Becomes Nut to the Bolt
• Substrate Suitability: Concrete Brick Wood Marble Block Stone
• Number in Pack: VARIOUS PACK QUANTIES
• Use with Smaller Drill Bits Than:: Traditional Bolts and Sleeve Anchors
• Concrete Anchor Anchorage Anchoring:: No expansion Stress Close to Edge Removable
• Finish: Yellow Zinc
• Fencing Support:: Mechanical Interlock Between Construction Materia
• M5 Thunder Bolt Drill Diameter: 5mm
• Material: Steel
• Grade: 0
• Thread Size: 0
• Brand: Thunderbolt
• M12 Thunder Bolt Drill Diameter: 12mm
• Type: Hex Bolts
• System of Measurement: Metric
• Builder Property Developers: Shop Fitting Plumbers Contractor Roofer
• M6 Thunder Bolt Drill Diameter: 6mm
• Country/Region of Manufacture: Taiwan
• Head Style: Hex Head