M12 Socket Screw Low Cap High Tensile 10.9 Self Colour DIN7984

  

M12 Socket Screw Low Cap High Tensile 10.9 Self Colour DIN7984. M12, Low Cap Head, Hexagonal/ Allen Socket, Bolt/ Screw, High Tensile (10.9), DIN 7984, ASME B18.3.1M Fixaball sells all lengths of M12, high tensile, 10.9 Grade Steel, low cap head, allen/ hex socket screws. M12, Low Cap, Hexagonal/ Allen Socket, Bolt/ Screw Description Low Cap, refers to a shorter head and is available for those applications that require a shallow profile either in tight installations or visual discretion.

Hexagonal/ Allen Socket is the hexagonal indentation inside the head that you insert the hexagonal/ allen key into to be able to tighten and loosen the fastener. A bolt is a version which has a part plain (unthreaded) shank under the low cap head. A screw (set) is a version that is fully theaded under the low cap head. Orders placed before 2pm are dispatched same day (Mon-Fri).

Of items in pack','length', and'quantity', of packs selection from the drop down menus. M12, Low Cap, Hexagonal/ Allen Socket, Bolt/ Screw Lengths Available: Fully Threaded - FT Partially Threaded (part unthreaded shank) - PT M12-1.75x20 MM, (FT) LOW HEAD SOCKET CAP SCREWS 10.9 COARSE DIN 7984 SELF COLOUR M12-1.75x25 MM, (FT) LOW HEAD SOCKET CAP SCREWS 10.9 COARSE DIN 7984 SELF COLOUR M12-1.75x30 MM, (FT) LOW HEAD SOCKET CAP SCREWS 10.9 COARSE DIN 7984 SELF COLOUR M12-1.75x35 MM, (FT) LOW HEAD SOCKET CAP SCREWS 10.9 COARSE DIN 7984 SELF COLOUR M12-1.75x50 MM, (PT) LOW HEAD SOCKET CAP SCREWS 10.9 COARSE DIN 7984 SELF COLOUR M12-1.75x60 MM, (PT) LOW HEAD SOCKET CAP SCREWS 10.9 COARSE DIN 7984 SELF COLOUR M12-1.75x80 MM, (PT) LOW HEAD SOCKET CAP SCREWS 10.9 COARSE DIN 7984 SELF COLOUR Metric Coarse Thread (mm) Metric coarse is the technical term given to the most common thread available, today. The mm/ millimetre units and were developed to simplify the imperial systems. A coarse thread has less helical coils per mm and a fine one has more. Coarse is used for heavier/ higher torque loads.

Image is for illustrative purposes only. M12, Low Cap Head, Hexagonal/ Allen Socket, Bolt/ Screw, High Tensile (10.9), DIN 7984, ASME B18.3.1M. Fixaball sells all lengths of M12, high tensile, 10.9 Grade Steel, low cap head, allen/ hex socket screws. M12, Low Cap, Hexagonal/ Allen Socket, Bolt/ Screw Description. Low Cap, refers to a shorter head and is available for those applications that require a shallow profile either in tight installations or visual discretion.

Is the hexagonal indentation inside the head that you insert the hexagonal/ allen key into to be able to tighten and loosen the fastener. Is a version which has a part plain (unthreaded) shank under the low cap head.

(set) is a version that is fully theaded. Under the low cap head. Of packs selection from the drop down menus.

M12, Low Cap, Hexagonal/ Allen Socket, Bolt/ Screw Lengths Available. Partially Threaded (part unthreaded shank) - PT. M12-1.75x20 MM, (FT) LOW HEAD SOCKET CAP SCREWS 10.9 COARSE DIN 7984 SELF COLOUR. M12-1.75x25 MM, (FT) LOW HEAD SOCKET CAP SCREWS 10.9 COARSE DIN 7984 SELF COLOUR. M12-1.75x30 MM, (FT) LOW HEAD SOCKET CAP SCREWS 10.9 COARSE DIN 7984 SELF COLOUR. M12-1.75x35 MM, (FT) LOW HEAD SOCKET CAP SCREWS 10.9 COARSE DIN 7984 SELF COLOUR. M12-1.75x50 MM, (PT) LOW HEAD SOCKET CAP SCREWS 10.9 COARSE DIN 7984 SELF COLOUR. M12-1.75x60 MM, (PT) LOW HEAD SOCKET CAP SCREWS 10.9 COARSE DIN 7984 SELF COLOUR. M12-1.75x80 MM, (PT) LOW HEAD SOCKET CAP SCREWS 10.9 COARSE DIN 7984 SELF COLOUR. Metric coarse is the technical term given to the most common thread available, today. Coarse is uséd for heavier/ higher torque loads. Sorry, our items are NOT available for pick-up. No additional information at this time.

UNC 1 Hex Bolt and Set Screw High Tensille 8.8 Self Colour DIN931. M5 x Under 70mm Hex Bolt Nut Washer A2 304 Stainless Steel. 4mm Metric Slotted Coiled Roll Spring Tension Pin Steel Heavy. Trutek Magazine Collated Strip Drive Nail Pins for Hilti DX Machines.

To be eligible for a return, your item must be unuséd and in the same condition that you received it. It must also be in the original packaging with original documentation. This will enable an easier process of locating and amending orders.

If you're not happy, we will do everything possible to help. Please, please, please keep all documents, stickers, labels and packaging; it makes the process run quicker and easier. Exchanges (if applicable) NO QUIBBLE - All exchanges are welcomed, assuming that items are suitable for re-sale. After 2pm your order will join the following days post.

Usually, the easy bit is getting the order out the door, but, what happens after can occasionally disappoint us both. 2% (10 orders) are late 1.4% (7 orders) 1 day late 0.4% (2 orders) 2 days late 0.2% (1 order) 3+ days late 0.01% is reported lost. If you need a definite arrival time please select an express service at check out to avoid disappointment.