Flo-Tek 203505 Single Small Block Ford SBF 289 302 Aluminum Cylinder Head 58cc

  
America's Oldest Speed Shop®. Flo-Tek 203505 Small Block Ford Aluminum Cylinder Head.

Aluminum heads are the answer to the performance enthusiast and work on the small block Fords including the later EFI series when used in conjunction with an aftermarket intake, carb, and camshaft. Aluminum heads allow for a higher compression ratio than cast heads without creating pre-ignition problems.

Check your piston usage with the 58cc combustion chamber for accurate ratio computation. If using the heads on a 289 or 302 the upper row is 80 pounds net and the lower is 70 pounds.

Torqued in stock sequence and increments. If using on the 351 with the larger bolts it is 100 pounds net torque in same sequence and increments as stock.

You will need to check your push rod length to determine the correct length before ordering pushrods. Depending on the how much extra lift you are going to go with, you may also need different valve spring retainers that allow for more valve spring installed height. These Flo-Tek aluminum heads for the small block Ford are specified to take plug number AGSF-32C.

Valve springs are suitable for most hydraulic flat tappet and mild street hydraulic roller camshafts. You don't need to spend a fortune to get a top-performing, lightweight aluminum cylinder head for your small-block Ford V8. This Flo-Tek head has a long list of high-end features, minus the hefty price tag. 1.94" intake and 1.54" swirl-polished exhaust valves.

Compatible with most flat tappet camshafts. 3/8 rocker studs and guide plates.

See how this Flo-Tek head stacks up against the competition in. Tech article; 6 Small Block Ford Cylinder Heads That Work. Valve Spring Type: Single w/ Damper.

Valve Spring Application: Hydraulic & Solid Flat Tappet. Valve Spring Diameter: 1.465 O. Valve Spring Seat Pressure: 130 lbs. Valve Spring Rate: 280 lbs/in.

Valve Spring Rate: 240 lbs/in. Recommended Spark Plug: Motorcraft AGSF-32C or equivalent. Bored for 1/2 head bolts. I would by this product again. By 94Cobra on October 10, 2018.

I rebuilt my 94 cobra with these heads and an e303 cam and they seem to flow very good. I had a hard time aligning the the roller tip to the valve, at first I thought it was rocker stud not alining with valve tip, until I noticed How much side play my rockers had and thus not staying centered on valve. The fix was too shim the trunnion on the rockers. Nice heads for the price. Yes, I recommend this product.

Checked great right out of the box. By Lance on April 01, 2018. Worked great valves were solid with no leak by has a small amount of casting marks in the ports so an easy clean up and guide plates were nice being adjustable.

On the downside the rocker studs are too short to be used with the height of the valve stems but overall very pleased with the quality. By DazeCars on March 31, 2018.

You wont find heads of this quality at a better price anywhere. Speedway and Try-State Cylinder heads both stand behind this product. They don't flow as well as some of the more expensive options available but they flow way better than OEM cast iron heads. These are perfect for a street build and the price is outstanding! By Jason on February 20, 2018. Great product for the right price. By Matt on November 27, 2017.

Great improvement over my stock heads. Please pay for all items at the same time. We cannot combine your order if you have already paid. Speedway Motors is Americas Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 66 years.

Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. All exchanges need to have reshipping charges included. Speedway accepts full responsibility for the accuracy of our listings and product representation. The item "Flo-Tek 203505 Single Small Block Ford SBF 289 302 Aluminum Cylinder Head 58cc" is in sale since Friday, April 10, 2015.

This item is in the category "eBay Motors\Parts & Accessories\Performance & Racing Parts\Auto Performance Parts\Engine & Components\Cylinder Heads". The seller is "speedway_motors" and is located in Lincoln, Nebraska. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Viet nam.

• Brand: Flo-Tek
• Manufacturer Part Number: 203505